INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Country:||Papua New Guinea|
|Published (Last):||18 January 2012|
|PDF File Size:||9.22 Mb|
|ePub File Size:||14.74 Mb|
|Price:||Free* [*Free Regsitration Required]|
Do not allow material to remain in hoses, gun or spray equipment. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. Store in dry, shaded conditions away from sources of heat and ignition.
Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against interlnie or oxygen deficient hazards. VOC values are typical and are provided for guidance purposes only.
Once units of paint have been mixed they should niterline be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units. As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating.
Petersburg, Russia, phone: Products Marine Coatings Marine chemicals Marine lubricants. International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried.
Apply in good weather. Actual safety measures are dependant on application methods and work environment. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates. All surfaces to be coated should be clean, dry and free from contamination.
Multiple coats intelrine be required to achieve specified film thickness. Material is supplied in 2 containers as a unit.
Interline | Litnobiles
Consult your local International Paint representative for specific recommendations. Thoroughly flush all equipment with International GTA Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions.
Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Take precautions to avoid skin and eye contact ie.
Application by roller is recommended for small areas only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances.
Subject to re-inspection thereafter. Use International GTA only in exceptional circumstances. Always mix a complete unit in the proportions supplied. Based on this, products supplied in different territories may not be approved to intreline of the standards listed above.
Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays. Use in accordance with the standard Worldwide Marine Specifications. Interline A two pack epoxy holding primer. Consult your International Paint representative for details.
Consult your International Paint representative for specific recommendations. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. Clean all equipment immediately after use with International GTA Marine Coatings Marine chemicals Marine lubricants.